Software a Hardware

ABIT
(jak updatovat BIOS)

•  AT8 version 1.1
  • Support DRAM ECC Function..
  • Modify system state error after AC power lose
  • Modify some USB boot and sting fail
  • Modify CAS Latency timing issue
  • Modify auto boot up when inserted USB device.
  • BIOS compiled date: 3/10/2006
• AV8 version 2.7
  • Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
  • Enhanced compatibility with certain PCI RAID cards.
  • Support FX60.
  • BIOS compiled date: 02/23/2006
• AV8-3rd Eye version 2.7
  • Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
  • Enhanced compatibility with certain PCI RAID cards.
  • Support FX60.
  • BIOS compiled date: 02/23/2006
• KN8 SLI version 1.5
  • Support FX60. CPU
  • The POST screen now show correctly when ATI X1300 VGA card installed.
  • BIOS compiled date: 02/13/2006
• KN8 SLI version 1.5
  • Support FX60. CPU
  • The POST screen now show correctly when ATI X1300 VGA card installed.
  • BIOS compiled date: 02/13/2006
• KN8 Ultra version 1.5
  • Support FX60. CPU
  • The POST screen now show correctly when ATI X1300 VGA card installed.
  • BIOS compiled date: 02/13/2006
    

AOPEN

• i975Xa-YDG version R1.02
  • Fixed system hang when boot from win98 boot disk and select CDROM support
• TZ661-II version R1.09
  • Fixed system will be crushed ,resume from s3 used the SATA hard drive
• MP915-C version 2006/03/23
  • Automatically to detect the video output. The hot keys to switch video device under windows as below,
    
    Ctrl + Alt + F1 (D-Sub)
    Ctrl + Alt + F2 (S-Video)
    Ctrl + Alt + F4 (DVI)
    
    Note: The BIOS is for those mini PCs sold in Taiwan: MP915-P or MP915-C. You will see AOpen logo in post screen
• MP915-P version 2006/03/23
  • Automatically to detect the video output. The hot keys to switch video device under windows as below,
    
    Ctrl + Alt + F1 (D-Sub)
    Ctrl + Alt + F2 (S-Video)
    Ctrl + Alt + F4 (DVI)
    
    Note: The BIOS is for those mini PCs sold in Taiwan: MP915-P or MP915-C. You will see AOpen logo in post screen.

Beta:

• EZ18 version R1.12c Beta
  • enable USB-CDROM & USB-HDD item in BIOS Setup Screen
• EX18 version R1.12c Beta
  • enable USB-CDROM & USB-HDD item in BIOS Setup Screen
• EY18 version R1.12c Beta
  • enable USB-CDROM & USB-HDD item in BIOS Setup Screen

ASROCK
(jak updatovat BIOS)

• 775i65PE version 1.40 Dos
  • Update cpu code to support Cedar Mill CPU
• 939NF4G-SATA2 version 1.50 Win, Dos
  • Add "HDD Fast Detection" setup item in IDE configuration menu.
• K7S41 version 2.10 Dos
  • Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
• K7S41GX version 2.30 Dos
  • Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
• K7Upgrade-600 version 1.80 Dos
  • Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
• K7VM3 version 1.40 Dos
  • Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
• K7VT4A version 1.60 Dos
  • Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
• K7VT6 version 1.40 Dos
  • Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
• K8NF4G-SATA2 version 1.70 Win, Dos
  • Add "HDD Fast Detection" setup item in IDE configuration menu.
• K8Upgrade-VM800 version 2.20 Win, Dos
  • Add "HDD Fast Detection" setup item in IDE configuration menu.
• 
  

ASUS
(ASUS Update 6.09.01, jak updatovat BIOS)

Final

• A8N5X version 0902
  • Fixed RIS failed with NV onboard LAN due to IRQ conflict.
  • Fixed system hangs on POST while installing some PCI-E x16 VGA cards.
  • Update AWDFLASH to V1.17
• A8N-SLI SE version 0502
  • Fixed system hangs on POST while installing some PCI-E x16 VGA cards.
  • Update AWDFLASH to V1.17
• K8N version 1011
  • Patch EZ-Flash
• K8N-VM version 0403
  • Revised BIOS setup items
• P5S800-VM version 1020
  • Fixed error memory size information in "system information" in OS.
  • Fixed sysyem will hang while installing OS on SATA HD from LAN.Hide Item "Hyper Threading Function" in the Bios if installed CPU cannot support.
  • Show "AMIBIOS(C)2006" on POST screen.

Beta

• P5RD1-VM version 0903
  • Latest beta BIOS

BIOSTAR
(jak updatovat BIOS)

• 915P-A7 Combo version 2006/03/27 with | without bootup Biostar splash screen
  • To improve PCI-E VGA compatibility
• 945PL-A7A version 2006/03/27 with | without bootup Biostar splash screen
  • Update BIOS to support Intel 805 CPU
• 945PL-M7 version 2006/03/27 with | without bootup Biostar splash screen
  • Update BIOS to support Intel 805 CPU
• I945G-M7 version 2006/03/27 with | without bootup Biostar splash screen
  • Update BIOS to support Intel 805 CPU
• P4M800-M7A(V7.0) 06/03/23  with | without bootup Biostar splash screen
  • Updated Intel CPU Micro Cdoe and Supported Intel 805 CPU

DFI
(jak updatovat BIOS)

• 945G-TMGF version 2006/03/03
  • Support Intel Pentium 4 9xx Series 65nm Dual-core CPU.
  • Fixed IDE Secondary Master show wrong string from ATA to PIO when clear CMOS.
  • Modify CPU Temperature show by add 10 degree C for meet actual CPU temperature.
  • Fixed can't detect PS2 mouse when PS2 Key-Board absent.
  • Fixed Shutdown Temperature item no function.
  • Fixed OSB Logo show incorrectly.
  • Fixed DDR2-667MHz unstable.
  • Removed BIOS Flash Protect item.
  • Fixed show IDE 80PIN detect error if IDE second channel is SATA device

Beta:

• NF4 SLI INFINITY version 2006/03/16
  • Add AMD Opteron 939 Processor cool 'n' quiet function
• LANPARTY UT NF4 SLI-DR Venus version 2006/03/07
  • Fix ATI 1XXX series PCI-E VGA logo fail
• RS482 INFINITY version 2006/03/08
  • FIX DDR compatibility perblem with REV.E3 CPU.
  • Remove some unused item.
  • Add new CPU (ADA3000AKK4BX , OSA256FAA5BL and OSA856FAA5BM) cool"n"quiet table

ECS Elitegroup
(jak updatovat BIOS - WinFlash, Award, AMI)

• 915PL-A2 (PCB:3.X) version 060301
  • Fixed system will hang when both PATA and SATA were absent
  • Support new CPU：Intel Celeron D 355(G1 stepping)
  • Support Intel Prescott CPU: 662 and 672 with VT
  • Fixed wrong memory size in WinXP system information issue
  • Fixed onboard LAN power management issue
• KA1 MVP (PCB:1.X) version 1.1d
  • Be suitable with ATI external graphic card by request of ATI.
  • Fix ATI chipset with Winbond flash type ROM issue
  • Fix system run HCT kit fail issue
  • Change North bridge module code
  • Support AMD FX-60 VID for 1.35v CPU
  • Support AMD FX-60 Dual Core processors
  • Improve LAN stable issue with dual core CPU used on Linux
  • Support new OPN Rev:E4 and Rev:E6
  • Fixed LAN lookback fail.
• KV2 Extreme(PCB:1.0) version 1.3d
  • Support K8 CPU Cool'n'Quiet function on WIN2K.
  • Fix PCI SCSI card issue.
  • Support FX-60 VID for 1.35v CPU
  • Support new AMD Athlon 64 939 Rev.E4 CPU.
  • Support new AMD Athlon 64 X2 3800+ Rev.E6 CPU.
  • Fixed, system shows error message when update BIOS.
  • Support AMD 939 Rev:E6 CPU.
  • Support new AMD 939 E4 revision CPU.
• KV2 Lite (PCB: 1.0) version 1.3c
  • Support K8 CPU Cool 'n' Quiet function on WIN2K
  • Fix PCI SCSI card issue.
  • Support new AMD Athlon 64 939 Rev.E4 CPU
  • Patch cannot program LAN PHY EEPROM when it is empty.
  • Support new AMD Athlon 64 X2 3800+ Rev.E6 CPU
  • Fixed, system shows error message when update BIOS.
  • Support AMD 939 dual core CPU.
  • Support AMD 939 Rev:E6 CPU.
  • Support new AMD 939 E4 revision CPU.
• RD480-A939 (PCB:1.x) version 1.1c
  • Be suitable with ATI external graphic card by request of ATI.
  • Fix ATI chipset with Winbond flash type ROM issue
  • Fix system run HCT kit fail issue
  • Change north bridge module code
  • Improve performance mode.
  • Support AMD FX-60 VID for 1.35v CPU
  • Add verb table to support 883
  • Fix system will halt when first enter pseudo S3
• RS482-M(PCB:1.x) version 1.2b
  • Be suitable with ATI external graphic card by request of ATI.
  • Fix ATI chipset with Winbond flash type ROM issue
  • Fix system run HCT kit fail issue
  • Add South bridge SB450 BIOS code
  • Update to support AMD FX-60 VID for 1.35v CPU
  • Support AMD FX-60 Dual Core processors
  • Update VGA Rom
  • Support new OPN Rev:E4 and Rev:E6 CPU for RS482-M model
  • Improve SATA function with dual core CPU
  • Support rev.E6 CPU
• RS482-M754(PCB:1.x) version 1.0h
  • Be suitable with ATI external graphic card by request of ATI.
  • Fix ATI chipset with Winbond flash type ROM issue
  • Fix system run HCT kit fail issue
  • Add South bridge SB450 BIOS code
  • Update to support AMD FX-60 VID for 1.35v CPU
  • Support AMD FX-60 Dual Core processors
  • Update VGA Rom
  • Support new OPN Rev:E4 and Rev:E6 CPU for RS482-M model
  • Improve SATA function with dual core CPU
  • Support rev.E6 CPU
• RX480-A (PCB:1.0) version 1.1e
  • Be suitable with ATI external graphic card by request of ATI.
  • Fix ATI chipset with Winbond flash type ROM issue
  • Fix system run HCT kit fail issue
  • Add South bridge SB450 BIOS code
  • Support AMD FX-60 Dual Core processors
  • Improve LAN stable with dual core CPU
  • Support new OPN Rev:E4 and Rev:E6 CPU
  • Fixed LAN lookback fail
  • Auto detect 10/100 and Giga LAN function.
  • Fixed system random cannot by WD reset when CPU divider change
• PA1MVP (PCB:2.X) version 1.1A
  • Support Intel Pentium D#805 Smithfield/FSB533 775 Pin CPU.
  • Support Intel 662/672/355/351 CPU
• PA1 MVP Lite (PCB:2.X) version 1.1A
  • Support Intel Pentium D #805 Smithfield/FSB533 775 Pin CPU
  • Support Intel Presler 920/930/940/950, Cedar Mill 661/651 and some Prescott new CPUs
  • Support Intel 662/672/355/351 CPU

EPOX

• EP-8NPA7I version 2006/03/08
  • Fxed: System hang at S5 when using ATEN(CS-72E) KVM data switch
  • Fixed: System hang when used PCI vga card and full screen logo enabled
• EP-8NPAI version 2006/03/24
  • Fixed system hang at S5 when using ATEN(CS-72E) KVM data switch.
  • Fix system hang when used PCI vga card and full screen logo enabled.
• EP-8NPAJ version 2006/03/08
  • Fxed: System hang at S5 when using ATEN(CS-72E) KVM data switch
  • Added: "Burst Length" and " DRAM Bank Interleaving" item
  • Fixed: System hang at post 29h after reset from Windows XP/SP2 if Cool'n'Quiet enabled
  • Fixed: System hang when used PCI vga card and full screen logo enabled
• EP-9GF6100M version 2006/03/15
  • Changed: Boot title name to "GeForce6100 + nForce410".
  • Added: "Burst Length" and " DRAM Bank Interleaving" item.
  • Fixed: System hang at post 29h after reset from Windows XP SP2 if Cool'n'Quiet enabled

GIGABITE
(jak updatovat BIOS)

Final

• GA-8I945GMH-RH version F2
  • Fixed copy-compare issue with Infineon memory chip
• GA-8I945PLGE-RH version F3
  • Fixed an error detection of Audio Front panel with F2 BIOS
• GA-8N775 version F3
  • Update SMI code and Flash part SST49LF040B-CA support
• GA-8N-SLI rev 1.0 version F5
  • Update SMI code and Flash part SST49LF040B-CA support
• GA-8N-SLI rev 1.1 version F5
  • Update SMI code and Flash part SST49LF040B-CA support
• GA-K8N51GMF version F5
  • Improve some DDR compatibly with system
• GA-K8N51GMF-9 version F4
  • Improve some DDR compatibly with system
• GA-K8N51PVMT-9 version F3
  • Improve some DDR compatibly with system
• GA-K8N-SLI version F8
  • Add Flash part SST49LF040B-CA support
• GA-8N-SLI Royal version F6
  • Update SMI code and Flash part SST49LF040B-CA support
• GA-8N-SLI Quad Royal version F4
  • Update SMI code and Flash part SST49LF040B-CA support
• GA-K8NF9 Ultra version F6
  • Add Flash part SST49LF040B-CA support
• GA-K8NF-9 (Rev 2.x) version FD
  • Add Flash part SST49LF040B-CA suppor
• GA-8VT880P Combo (Rev 1.x) version F6
  • Remove SYSTEM Temp, BIOS Item
• GA-8VT880P Combo (Rev 2.x) version FD
  • Remove SYSTEM Temp, BIOS Item

INTEL
(jak updatovat BIOS - pomocí Intel Express nebo Iflash)

• D975XBX version 0807 Express | Iflash
  • Added extended support for new CPUs.
  • Enabled CPU Fan Control by default.

MSI
(jak updatovat BIOS - Award, AMI)

• 915G Combo version 1.9
  • Update VIA RAID Option ROM version.
  • Support Winbond W39V040FBP Flash ROM
• 915P Combo version 1.9
  • Update VIA RAID Option ROM version.
  • Support Winbond W39V040FBP Flash ROM
• K8N Neo-V2 version 7.1
  • Support system boot via onboard LAN chip. 
  • Support system auto recovery function after overclock fail.
• PM8PM version 1.1
  • Fixed the system will auto shutdown after resume from S3 under WinME.
  • Update CPU Microcode