BIOSY - Download 1.
12. 6. 2007
ABIT
(jak updatovat BIOS)
- AT8 version 1.1
- Support DRAM ECC Function..
- Modify system state error after AC power lose
- Modify some USB boot and sting fail
- Modify CAS Latency timing issue
- Modify auto boot up when inserted USB device.
- BIOS compiled date: 3/10/2006
- AV8 version 2.7
- Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
- Enhanced compatibility with certain PCI RAID cards.
- Support FX60.
- BIOS compiled date: 02/23/2006
- AV8-3rd Eye version 2.7
- Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
- Enhanced compatibility with certain PCI RAID cards.
- Support FX60.
- BIOS compiled date: 02/23/2006
- KN8 SLI version 1.5
- Support FX60. CPU
- The POST screen now show correctly when ATI X1300 VGA card installed.
- BIOS compiled date: 02/13/2006
- KN8 SLI version 1.5
- Support FX60. CPU
- The POST screen now show correctly when ATI X1300 VGA card installed.
- BIOS compiled date: 02/13/2006
- KN8 Ultra version 1.5
- Support FX60. CPU
- The POST screen now show correctly when ATI X1300 VGA card installed.
- BIOS compiled date: 02/13/2006
AOPEN
- i975Xa-YDG version R1.02
- Fixed system hang when boot from win98 boot disk and select CDROM support
- TZ661-II version R1.09
- Fixed system will be crushed ,resume from s3 used the SATA hard drive
- MP915-C version 2006/03/23
- Automatically to detect the video output. The hot keys to switch video device under windows as below,
Ctrl + Alt + F1 (D-Sub)
Ctrl + Alt + F2 (S-Video)
Ctrl + Alt + F4 (DVI)
Note: The BIOS is for those mini PCs sold in Taiwan: MP915-P or MP915-C. You will see AOpen logo in post screen
- Automatically to detect the video output. The hot keys to switch video device under windows as below,
- MP915-P version 2006/03/23
- Automatically to detect the video output. The hot keys to switch video device under windows as below,
Ctrl + Alt + F1 (D-Sub)
Ctrl + Alt + F2 (S-Video)
Ctrl + Alt + F4 (DVI)
Note: The BIOS is for those mini PCs sold in Taiwan: MP915-P or MP915-C. You will see AOpen logo in post screen.
- Automatically to detect the video output. The hot keys to switch video device under windows as below,
Beta:
- EZ18 version R1.12c Beta
- enable USB-CDROM & USB-HDD item in BIOS Setup Screen
- EX18 version R1.12c Beta
- enable USB-CDROM & USB-HDD item in BIOS Setup Screen
- EY18 version R1.12c Beta
- enable USB-CDROM & USB-HDD item in BIOS Setup Screen
ASROCK
(jak updatovat BIOS)
- 775i65PE version 1.40 Dos
- Update cpu code to support Cedar Mill CPU
- 939NF4G-SATA2 version 1.50 Win, Dos
- Add "HDD Fast Detection" setup item in IDE configuration menu.
- K7S41 version 2.10 Dos
- Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
- K7S41GX version 2.30 Dos
- Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
- K7Upgrade-600 version 1.80 Dos
- Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
- K7VM3 version 1.40 Dos
- Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
- K7VT4A version 1.60 Dos
- Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
- K7VT6 version 1.40 Dos
- Support Geode NX CPU 1500+ (1000MHz) and 1750+ (1400MHz).
- K8NF4G-SATA2 version 1.70 Win, Dos
- Add "HDD Fast Detection" setup item in IDE configuration menu.
- K8Upgrade-VM800 version 2.20 Win, Dos
- Add "HDD Fast Detection" setup item in IDE configuration menu.
ASUS
(ASUS Update 6.09.01, jak updatovat BIOS)
Final
- A8N5X version 0902
- Fixed RIS failed with NV onboard LAN due to IRQ conflict.
- Fixed system hangs on POST while installing some PCI-E x16 VGA cards.
- Update AWDFLASH to V1.17
- A8N-SLI SE version 0502
- Fixed system hangs on POST while installing some PCI-E x16 VGA cards.
- Update AWDFLASH to V1.17
- K8N version 1011
- Patch EZ-Flash
- K8N-VM version 0403
- Revised BIOS setup items
- P5S800-VM version 1020
- Fixed error memory size information in "system information" in OS.
- Fixed sysyem will hang while installing OS on SATA HD from LAN.Hide Item "Hyper Threading Function" in the Bios if installed CPU cannot support.
- Show "AMIBIOS(C)2006" on POST screen.
Beta
- P5RD1-VM version 0903
- Latest beta BIOS
BIOSTAR
(jak updatovat BIOS)
- 915P-A7 Combo version 2006/03/27 with | without bootup Biostar splash screen
- To improve PCI-E VGA compatibility
- 945PL-A7A version 2006/03/27 with | without bootup Biostar splash screen
- Update BIOS to support Intel 805 CPU
- 945PL-M7 version 2006/03/27 with | without bootup Biostar splash screen
- Update BIOS to support Intel 805 CPU
- I945G-M7 version 2006/03/27 with | without bootup Biostar splash screen
- Update BIOS to support Intel 805 CPU
- P4M800-M7A(V7.0) 06/03/23 with | without bootup Biostar splash screen
- Updated Intel CPU Micro Cdoe and Supported Intel 805 CPU
DFI
(jak updatovat BIOS)
- 945G-TMGF version 2006/03/03
- Support Intel Pentium 4 9xx Series 65nm Dual-core CPU.
- Fixed IDE Secondary Master show wrong string from ATA to PIO when clear CMOS.
- Modify CPU Temperature show by add 10 degree C for meet actual CPU temperature.
- Fixed can't detect PS2 mouse when PS2 Key-Board absent.
- Fixed Shutdown Temperature item no function.
- Fixed OSB Logo show incorrectly.
- Fixed DDR2-667MHz unstable.
- Removed BIOS Flash Protect item.
- Fixed show IDE 80PIN detect error if IDE second channel is SATA device
Beta:
- NF4 SLI INFINITY version 2006/03/16
- Add AMD Opteron 939 Processor cool 'n' quiet function
- LANPARTY UT NF4 SLI-DR Venus version 2006/03/07
- Fix ATI 1XXX series PCI-E VGA logo fail
- RS482 INFINITY version 2006/03/08
- FIX DDR compatibility perblem with REV.E3 CPU.
- Remove some unused item.
- Add new CPU (ADA3000AKK4BX , OSA256FAA5BL and OSA856FAA5BM) cool"n"quiet table
ECS Elitegroup
(jak updatovat BIOS - WinFlash, Award, AMI)
- 915PL-A2 (PCB:3.X) version 060301
- Fixed system will hang when both PATA and SATA were absent
- Support new CPU：Intel Celeron D 355(G1 stepping)
- Support Intel Prescott CPU: 662 and 672 with VT
- Fixed wrong memory size in WinXP system information issue
- Fixed onboard LAN power management issue
- KA1 MVP (PCB:1.X) version 1.1d
- Be suitable with ATI external graphic card by request of ATI.
- Fix ATI chipset with Winbond flash type ROM issue
- Fix system run HCT kit fail issue
- Change North bridge module code
- Support AMD FX-60 VID for 1.35v CPU
- Support AMD FX-60 Dual Core processors
- Improve LAN stable issue with dual core CPU used on Linux
- Support new OPN Rev:E4 and Rev:E6
- Fixed LAN lookback fail.
- KV2 Extreme(PCB:1.0) version 1.3d
- Support K8 CPU Cool'n'Quiet function on WIN2K.
- Fix PCI SCSI card issue.
- Support FX-60 VID for 1.35v CPU
- Support new AMD Athlon 64 939 Rev.E4 CPU.
- Support new AMD Athlon 64 X2 3800+ Rev.E6 CPU.
- Fixed, system shows error message when update BIOS.
- Support AMD 939 Rev:E6 CPU.
- Support new AMD 939 E4 revision CPU.
- KV2 Lite (PCB: 1.0) version 1.3c
- Support K8 CPU Cool 'n' Quiet function on WIN2K
- Fix PCI SCSI card issue.
- Support new AMD Athlon 64 939 Rev.E4 CPU
- Patch cannot program LAN PHY EEPROM when it is empty.
- Support new AMD Athlon 64 X2 3800+ Rev.E6 CPU
- Fixed, system shows error message when update BIOS.
- Support AMD 939 dual core CPU.
- Support AMD 939 Rev:E6 CPU.
- Support new AMD 939 E4 revision CPU.
- RD480-A939 (PCB:1.x) version 1.1c
- Be suitable with ATI external graphic card by request of ATI.
- Fix ATI chipset with Winbond flash type ROM issue
- Fix system run HCT kit fail issue
- Change north bridge module code
- Improve performance mode.
- Support AMD FX-60 VID for 1.35v CPU
- Add verb table to support 883
- Fix system will halt when first enter pseudo S3
- RS482-M(PCB:1.x) version 1.2b
- Be suitable with ATI external graphic card by request of ATI.
- Fix ATI chipset with Winbond flash type ROM issue
- Fix system run HCT kit fail issue
- Add South bridge SB450 BIOS code
- Update to support AMD FX-60 VID for 1.35v CPU
- Support AMD FX-60 Dual Core processors
- Update VGA Rom
- Support new OPN Rev:E4 and Rev:E6 CPU for RS482-M model
- Improve SATA function with dual core CPU
- Support rev.E6 CPU
- RS482-M754(PCB:1.x) version 1.0h
- Be suitable with ATI external graphic card by request of ATI.
- Fix ATI chipset with Winbond flash type ROM issue
- Fix system run HCT kit fail issue
- Add South bridge SB450 BIOS code
- Update to support AMD FX-60 VID for 1.35v CPU
- Support AMD FX-60 Dual Core processors
- Update VGA Rom
- Support new OPN Rev:E4 and Rev:E6 CPU for RS482-M model
- Improve SATA function with dual core CPU
- Support rev.E6 CPU
- RX480-A (PCB:1.0) version 1.1e
- Be suitable with ATI external graphic card by request of ATI.
- Fix ATI chipset with Winbond flash type ROM issue
- Fix system run HCT kit fail issue
- Add South bridge SB450 BIOS code
- Support AMD FX-60 Dual Core processors
- Improve LAN stable with dual core CPU
- Support new OPN Rev:E4 and Rev:E6 CPU
- Fixed LAN lookback fail
- Auto detect 10/100 and Giga LAN function.
- Fixed system random cannot by WD reset when CPU divider change
- PA1MVP (PCB:2.X) version 1.1A
- Support Intel Pentium D#805 Smithfield/FSB533 775 Pin CPU.
- Support Intel 662/672/355/351 CPU
- PA1 MVP Lite (PCB:2.X) version 1.1A
- Support Intel Pentium D #805 Smithfield/FSB533 775 Pin CPU
- Support Intel Presler 920/930/940/950, Cedar Mill 661/651 and some Prescott new CPUs
- Support Intel 662/672/355/351 CPU
EPOX
- EP-8NPA7I version 2006/03/08
- Fxed: System hang at S5 when using ATEN(CS-72E) KVM data switch
- Fixed: System hang when used PCI vga card and full screen logo enabled
- EP-8NPAI version 2006/03/24
- Fixed system hang at S5 when using ATEN(CS-72E) KVM data switch.
- Fix system hang when used PCI vga card and full screen logo enabled.
- EP-8NPAJ version 2006/03/08
- Fxed: System hang at S5 when using ATEN(CS-72E) KVM data switch
- Added: "Burst Length" and " DRAM Bank Interleaving" item
- Fixed: System hang at post 29h after reset from Windows XP/SP2 if Cool'n'Quiet enabled
- Fixed: System hang when used PCI vga card and full screen logo enabled
- EP-9GF6100M version 2006/03/15
- Changed: Boot title name to "GeForce6100 + nForce410".
- Added: "Burst Length" and " DRAM Bank Interleaving" item.
- Fixed: System hang at post 29h after reset from Windows XP SP2 if Cool'n'Quiet enabled
GIGABITE
(jak updatovat BIOS)
Final
- GA-8I945GMH-RH version F2
- Fixed copy-compare issue with Infineon memory chip
- GA-8I945PLGE-RH version F3
- Fixed an error detection of Audio Front panel with F2 BIOS
- GA-8N775 version F3
- Update SMI code and Flash part SST49LF040B-CA support
- GA-8N-SLI rev 1.0 version F5
- Update SMI code and Flash part SST49LF040B-CA support
- GA-8N-SLI rev 1.1 version F5
- Update SMI code and Flash part SST49LF040B-CA support
- GA-K8N51GMF version F5
- Improve some DDR compatibly with system
- GA-K8N51GMF-9 version F4
- Improve some DDR compatibly with system
- GA-K8N51PVMT-9 version F3
- Improve some DDR compatibly with system
- GA-K8N-SLI version F8
- Add Flash part SST49LF040B-CA support
- GA-8N-SLI Royal version F6
- Update SMI code and Flash part SST49LF040B-CA support
- GA-8N-SLI Quad Royal version F4
- Update SMI code and Flash part SST49LF040B-CA support
- GA-K8NF9 Ultra version F6
- Add Flash part SST49LF040B-CA support
- GA-K8NF-9 (Rev 2.x) version FD
- Add Flash part SST49LF040B-CA suppor
- GA-8VT880P Combo (Rev 1.x) version F6
- Remove SYSTEM Temp, BIOS Item
- GA-8VT880P Combo (Rev 2.x) version FD
- Remove SYSTEM Temp, BIOS Item
INTEL
(jak updatovat BIOS - pomocí Intel Express nebo Iflash)
- D975XBX version 0807 Express | Iflash
- Added extended support for new CPUs.
- Enabled CPU Fan Control by default.
MSI
(jak updatovat BIOS - Award, AMI)
- 915G Combo version 1.9
- Update VIA RAID Option ROM version.
- Support Winbond W39V040FBP Flash ROM
- 915P Combo version 1.9
- Update VIA RAID Option ROM version.
- Support Winbond W39V040FBP Flash ROM
- K8N Neo-V2 version 7.1
- Support system boot via onboard LAN chip.
- Support system auto recovery function after overclock fail.
- PM8PM version 1.1
- Fixed the system will auto shutdown after resume from S3 under WinME.
- Update CPU Microcode
Komentáře
Přehled komentářů
Zatím nebyl vložen žádný komentář